Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1261 - 1290 of 2294

Full-Text Articles in Physical Sciences and Mathematics

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao Aug 2008

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density of 198mW/cm2 at 234mA/cm2.


Sucrose Modification On Li_4ti_5o_(12) Anode Material, Zhi-Hong Tian, Hai-Lei Zhao, Zhi-Feng Wang, Jie Wang Aug 2008

Sucrose Modification On Li_4ti_5o_(12) Anode Material, Zhi-Hong Tian, Hai-Lei Zhao, Zhi-Feng Wang, Jie Wang

Journal of Electrochemistry

The carbon modified Li4Ti5O12 was prepared by solid state reaction by using sucrose as carbon source.The XRD results showed that the incorporation of carbon did not change the spinel crystal structure of Li4Ti5O12 but it could prevent the particle agglomeration.The sample with 10%(by mass) sucrose displayed the best electrical performance,a 179.1 mAh/g of initial specific capacity was obtained at 0.2C,while 143.8 and 129.4 mAh/g at 2C and 3C,respectively.The CV and EIS studies revealed that carbon modification lowered the electrode polarization and electrode reaction resistance of Li4Ti5O12.


Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu Aug 2008

Electrochemical Reductive Behaviors Of 3,4,5,6-Tetrachloro-2-Trichloromethylpyridine At Ag Electrode, Chun-An Ma, Yi-Jiao Hu, Ying-Hua Xu

Journal of Electrochemistry

The electrochemical reductive behavior of 3,4,5,6-tetrachloro-2-trichloropyridine(heptachloropyridine) on silver electrode in the mixture of acetonitrile and water solutions containing TBAP was investigated by cyclic voltammetry.The influences of scan rate,concentration and temperature on the electrochemical behavior were discussed.It was shown that the reduction of heptachloropyridine on the silver electrode was a diffusion-controlled irreversible process.The diffusion coefficient of heptachloropyridine in the acetonitrile solution was 3.0×10-5 cm2/s.The mechanism of the dechloration of 3,4,5,6-tetrachloro-2-trichloropyridine was also discussed.


Electrochemical Synthesis,Characterization And Fluorescence Property Of Nano Na_2sif_6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu Aug 2008

Electrochemical Synthesis,Characterization And Fluorescence Property Of Nano Na_2sif_6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu

Journal of Electrochemistry

The nano TiO2 film was prepared by sol-gel process and characterized with X-ray diffraction(XRD) and scanning electron microscope(SEM).It was found that the average size of pore diameter was about 80 nm for the nano TiO2 film.The Nano Na2SiF6 was synthesized by electrochemical deposition on the nanoporous film electrode and characterized with XRD and transmission electron microscope(TEM).The result showed that the average size of nanoparticle was 20 nm for the nano Na2SiF6.The fluorescence property of nano Na2SiF6 was also studied briefly.The result indicated that the nano Na2SiF6 exhibited strong fluorescence emission at 452.4 nm and 285 nm,respectively.


Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang Aug 2008

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang

Journal of Electrochemistry

Polyaluminum chloride(PAC) was prepared by electrochemical process coupled with magnetic field paralleling to the gravitation direction.The electrolyte of 0.1 M AlCl3 solution was used,with the iron plates as cathode and aluminum sheets as anode.PAC of 0.6 M total aluminum(AlT),83.2% Alb to AlT and basicity(Ba)=2.4 was synthesized when magnetic flux density was 0.4T,the distance of electrodes was 15 mm,the voltage of electrolysis cell was 2.4 V and current density was 300 A/m2.Under above experimental conditions,the voltage efficiency,energy efficiency and electrodes surface area to reduction cells of electrochemical reactor were 85.2%,81.5% and 140.1m2/m3,respectively.The polarization curves determined by constant-current method showed that the …


Applications Of Electroless Deposition Ni-Cu-P Coating On The Gas Condensing Exchanger, Li-Jun Yang, Gui-Chang Liu, Sui-Lin Wang, Zhi-Cong Shi Aug 2008

Applications Of Electroless Deposition Ni-Cu-P Coating On The Gas Condensing Exchanger, Li-Jun Yang, Gui-Chang Liu, Sui-Lin Wang, Zhi-Cong Shi

Journal of Electrochemistry

The effects of copper sulfate concentration in the plating solution on the composition,the structure and the anticorrosion properties of Ni-Cu-P deposited coating were studied by EPMA、XRD and polarization curves.The anticorrosion properties of Ni-Cu-P deposited coating was optimal as the copper sulfate concentration in the plating solution was 0.5 g·L-1.The electrochemical anticorrosion properties of Ni-Cu-P,Ni-P deposited coatings and copper plates were investigated in the gas condensate.The self-corrosion potential of Ni-Cu-P deposited coatings was low,the self-corrosion current density was small,and the electrochemical impedance was the highest.Therefore,the electroless Ni-Cu-P coatings can be used as anticorrosion cover and anodic sacrificial protective coatings of copper …


Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo Aug 2008

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo

Journal of Electrochemistry

The self-assembled films of tetradecylamine were formed on iron surface,and the inhibition ability of which for iron corrosion in 0.5 mol/L H2SO4 solutions was studied by electrochemical impedance spectroscopy technique.Results indicated that longer immersion time would result in stronger inhibition ability of the films.The maximal inhibition efficiency(IE) of the tetradecylamine films was 68.7%.When the tetradecylamine films were modified by dodecylthiol,the mixed films became denser and more stable,thus the inhibition ability increased remarkably.The η of the mixed films increased to 78.2%.


Electrodeposition Of Sol-Gel Imprinted Films Modified Electrode And Its Application For 3,4-Dihydroxybenzoic Acids Determination, Gui-Lin Wang, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang May 2008

Electrodeposition Of Sol-Gel Imprinted Films Modified Electrode And Its Application For 3,4-Dihydroxybenzoic Acids Determination, Gui-Lin Wang, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang

Journal of Electrochemistry

The sol-gel molecularly imprinted films modified glassy carbon electrode was prepared by electrodeposition of tetramethoxysilane(TMOS) and phenyltrimethoxysilane(PTMOS) with chronoamperometry in the presence of template molecules 3,4-dihydroxybenzoic acid(3,4-DHBA) followed by extraction with ethanol.The modified electrode could successfully avoid the polymerization of oxidized 3,4-DHBA and the interference of 2,4-DHBA.A linear concentration response curve was obtained from 1.0 × 10-5 mol·L-1 to 8.0×10-4 mol·L-1,with the detected concentration limit of 5.0 × 10-6 mol·L-1.


Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang May 2008

Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang

Journal of Electrochemistry

The carbon nanotube arrays(CNTA) were grown directly on the substrates of Ta and stainless steel by chemical vapor deposition.The button-like supercapacitors were fabricated based the CNTA electrodes.The electrochemical performance of CNTA based supercapacitors presentsed high working voltage(3.5 V),long cycle life,and good rate capability.The power and energy densities are were 928 kW·kg-1and 19 Wh·kg-1,respectively(based on the mass of CNTA).


Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing May 2008

Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing

Journal of Electrochemistry

The development and improvement of electrode materials can result in the enhancement of the performances of electrochemical capacitor.In this paper various copper/activated carbon composites were prepared in the presence of different amounts(from 0% to 40%) of copper nitrate from bituminous coal.Then different electrodes were prepared from copper oxide,activated carbon and copper/activated carbon composites,respectively,and were characterized by cyclic voltammetry,alternative current(AC) impedance,charge-discharge at constant current and maintenance of the self-potential.The results showed that the proper amount of copper in copper/activated carbon composites positively influenced the electrochemical performances of electrodes,and the capacitance of copper/activated carbon composites was larger than that of the total …


Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao May 2008

Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao

Journal of Electrochemistry

The performance of the passive DMFC was systematically investigated under an ambient condition by simulating a wide range of temperature and humidity in a high-quality environmentally controlled room.The results indicated that the performance of the passive DMFC was nearly independent of ambient humidity from 30% to 90% RH and water produced in the cathode was expelled mostly from the cell in a liquid state.Compared with the humidity,the ambient temperature has a significant effect on the performance of the passive DMFC.The power density of 30 mW·cm-2 were obtained at 40℃,while only 10 mW·cm-2 at 10 ℃.


Preparation And Electrochemical Capacitance Of Spherical-Like Polypyrrole Doped With Heparin Sodium, Hong-Yu Mi, Xiao-Gang Zhang, Su-Dong Yang, Xiang-Guo Ye May 2008

Preparation And Electrochemical Capacitance Of Spherical-Like Polypyrrole Doped With Heparin Sodium, Hong-Yu Mi, Xiao-Gang Zhang, Su-Dong Yang, Xiang-Guo Ye

Journal of Electrochemistry

Spherical-like polypyrrole with an average diameter of 100 nm as the electrode material for supercapacitor was prepared by a self-assembly process with heparin sodium salt as the dopant at-10 ℃.The morphology and electrochemical properties were characterized by transmission electron microscopy(TEM),cyclic voltammetry(CV),galvanostatic charge/discharge and electrochemical impedance spectroscopy(EIS) measurements.The results showed that the polypyrrole doped with heparin sodium salt exhibited good capacitive behavior.The specific capacitance of single electrode was up to 338 F/g at 3 mA/cm2.


Effect Of Mn~(2+) Doping On The Electrochemical Performance Of Licopo_4, Huan-Huan Li, Xiao-Liang Yang, Jin-Ping Wei, Zhen Zhou, Jie Yan May 2008

Effect Of Mn~(2+) Doping On The Electrochemical Performance Of Licopo_4, Huan-Huan Li, Xiao-Liang Yang, Jin-Ping Wei, Zhen Zhou, Jie Yan

Journal of Electrochemistry

Undoped and Mn-doped LiCoPO4 cathode materials were synthesized via a novel sol-gel route.The effects of Mn doping on the structure,morphology and electrochemical performance of the LiCo1-xMnxPO4 cathode material were investigated.X-ray diffraction analysis indicated that the olivine structure of the LiCo1-xMnxPO4 composite was well maintained after the doping of a small quantity of Mn2+.The LiCo0.99Mn0.01PO4 cathode material exhibited optimal electrochemical performance with a discharge capacity of 130.6mAh/g at 0.1C rate.


Direct Electrochemistry Of God On Glassy Carbon Electrode Modified With Mesoporous Carbon, Kun-Qi Wang, Lin Zhu, Wei Xing May 2008

Direct Electrochemistry Of God On Glassy Carbon Electrode Modified With Mesoporous Carbon, Kun-Qi Wang, Lin Zhu, Wei Xing

Journal of Electrochemistry

Glucose oxidase(GOD) is immobilized on glassy carbon electrode mesoporous carbon by simple method.Cyclic voltammetric results indicated that on GOD of the modified electrode a quasi-reversible redox reaction took place(GCE) surface modified at a formal potential of-0.4294 V in 0.1 mol/L phosphate buffer solution(PBS)(pH 7.1).The electrochemical reaction consisted of a two-electron transfer coupled with a two-proton transfer.The GOD can completely catalyze oxidation of glucose via electron transfer intermedia of ferrocene monocarboxylic acid(FMCA) in saturated solutions with N2.The bioactivity of GOD on the modified electrode with mesoporous carbon was obviously unattacked.


Electrochemical Performance Of C-Lifepo_4 By Polyaniline Doping, Wei Wang, Li-Fang Jiao, Hua-Tang Yuan May 2008

Electrochemical Performance Of C-Lifepo_4 By Polyaniline Doping, Wei Wang, Li-Fang Jiao, Hua-Tang Yuan

Journal of Electrochemistry

The olivine LiFePO4 cathode materials were synthesized using the solid state method in an inert atmosphere by doping polyaniline into the C-LiFePO4.It was found that the electrochemical performance of polyaniline-doped C-LiFePO4 slightly improved.At a low discharging rate(0.1C), the capability of(C-LiFePO4)0.9(PANI)0.1 reached 164 mAh·g-1.When the charge-discharge rate is increased to 0.5C and 1.0C,the showed capacities of 121.6 mAh·g-1 and 110.1 mAh·g-1 were obtained,respectively.


Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji May 2008

Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji

Journal of Electrochemistry

According to the complex interaction between dodecyl phosphonate and stainless steel surface as well as the zirconium ion,the self-assembled monolayer and double-layer dodecyl phosphonate modified 304 type stainless steel electrode were prepared.The electrodes were characteristiced by static contact angles and electrochemical polarization methods.The results suggested that the double-layer modified stainless steel electrode had better corrosion inhibition effect than the monolayer modified electrode.


Synthesis Of Agv_3o_8 As High-Capacity Of Cathode Materials For Lithium Secondary Batteries Via A Soft Chemistry Technique, Xiao-Yu Cao, Tao Li, Ling-Ling Xie, Xiang-Yang Yan, Chi-Wei Wang May 2008

Synthesis Of Agv_3o_8 As High-Capacity Of Cathode Materials For Lithium Secondary Batteries Via A Soft Chemistry Technique, Xiao-Yu Cao, Tao Li, Ling-Ling Xie, Xiang-Yang Yan, Chi-Wei Wang

Journal of Electrochemistry

The layered cathode material of AgV3O8 has been prepared for the lithium secondary batteries via the soft chemistry technique. The so-synthesized powders were characterized by XRD(powder X-ray diffraction),SEM(scanning electron microscope) and LPSA(laser particle size analysis).The electrochemical property was investigated by the galvanostatic discharge-charge technique.The results indicated that the particale sizes of AgV3O8 prepared were small in the distribution of narrow range,which leads to high discharge capacity.Among them,the material synthesized at 400 ℃ displayed the first discharge capacity of 760.5 mAh/g.


Preparation And Photoelectrochemical Properties Of Fe-Doped Tio_2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin May 2008

Preparation And Photoelectrochemical Properties Of Fe-Doped Tio_2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

The Fe-doped TiO2 nanotube arrays were fabricated in Fe(NO3)3-HF mixing solutions by electrochemical anodic oxidation method,and characterized by FESEM,Raman,XPS and DRS.The effect of Fe concentratiions on photoelectrochemical property of the arrays was also investigated.The diameters and lengths of Fe-doped TiO2 nanotube arrays were 50~90 nm and about 200 nm,respectively.Compared with the undoped TiO2 nanotube arrays,the absorption edge of Fe-doped TiO2 nanotube arrays appeared red shifting.The more Fe content,the larger red shifting,in addition,the photocurrent of Fe-doped TiO2 nanotube arrays increased obviously.


Property Of Organic Electrolyte In V_2o_5/C Electrochemical Capacitor, Hong Wang, Zhi-Yuan Tang, Zhong-Yan Li, Xin-Guo Zhuang May 2008

Property Of Organic Electrolyte In V_2o_5/C Electrochemical Capacitor, Hong Wang, Zhi-Yuan Tang, Zhong-Yan Li, Xin-Guo Zhuang

Journal of Electrochemistry

In this work,the V2O5 cathode and graphite anode were assembled into non-symmetric electrochemical capacitors using 1.0 mol/L LiClO4 /(EC + DMC),1.0 mol/L LiPF6 /(EC + DEC + DMC),and 1.6mol/L Et4NBF4/AN as electrolyte,respectively.Charging and discharging tests,Cyclic Voltammetry and AC impedance methods were used to investigate the performance of the non-symmetric electrochemical capacitors.The results showed that the electrolyte 1.0 mol/L LiClO4/(EC+DMC)displayed better cycling performance and less resistance.At the current density of 500 mA/g,its specific energy reached 8.4 Wh/kg and the charge-discharge efficiency was 98%.


The Effect Of Annealed Temperature On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Li-Kun Xu, Wen-Bin Liu, Gui-Lin Xue May 2008

The Effect Of Annealed Temperature On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Li-Kun Xu, Wen-Bin Liu, Gui-Lin Xue

Journal of Electrochemistry

The anode coatings of Ru-Ir-Sn oxide were prepared by sol-gel method with different annealed temperatures.The influences of annealed temperature in properties of anode coatings were characterized by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD),potential of chlorine evolution,accelerated life,cyclic voltammetry and electrochemical impedance spectroscopy(EIS) tests.The results showed that the annealed temperature affected the morphology of coatings,while the electric quantities of cyclic voltammetry and double layer capacitances of anode coatings had a tendency to fall down and the potential of chlorine evolution and accelerated life had a tendency to increase as the annealed temperature increased.


Cyclic Voltammetry And In Situ Ftir Studies Of Cyanide Adsorption On Nanostructured Au Film Electrode In Alkaline Solutions, Chun-Hua Zhen, Chun-Jie Fan, Shi-Gang Sun May 2008

Cyclic Voltammetry And In Situ Ftir Studies Of Cyanide Adsorption On Nanostructured Au Film Electrode In Alkaline Solutions, Chun-Hua Zhen, Chun-Jie Fan, Shi-Gang Sun

Journal of Electrochemistry

The adsorption of cyanide(CN-) on electrodes of nanometer scale thin film of gold supported on glassy carbon(nm-Au/GC) in alkaline solutions were investigated using cyclic voltammetry and in situ FTIR spectroscopy.It has revealed that the electrodeposited nanostructured Au thin film exhibited AIREs(abnormal infrared effects) for CN-adsorption,which manifested 3 nonlinear IR spectral features: inversion of the direction of CN-band,enhancement of IR absorption of adsorbed CN-species(about 39.2 folds) and increase in the FWHM(full width at half maximum) of CN-band.


Inhibition Of Amino Acids Against Steel In Hydrochloric Acid Solution, Ming-Yan Cheng, Wei-Ming Wu, He-Ming Liu, Hai-Yan Du May 2008

Inhibition Of Amino Acids Against Steel In Hydrochloric Acid Solution, Ming-Yan Cheng, Wei-Ming Wu, He-Ming Liu, Hai-Yan Du

Journal of Electrochemistry

The inhibition effect of glutamic acid towards the corrosion of X65 steel in hydrochloric acid solution(10%) was investigated using polarization techniques、electrochemical impedance spectroscopy(EIS) and SEM.The corrosion rate,corrosion potential(Ecoor),polarization resistance(Rp) and inhibition efficiency(η) were determined.The results revealed that the inhibitor is a mixed type inhibitor.It has promising corrosion inhibition efficiency at low concentrations.The inhibition efficiency(η) increased with increasing the concentration.The maximum inhibition efficiency appeared at 0.3 g·L-1.


Preparation Of Zn-Ni Alloy Whisker By Electrochemical Method, Zhen-Hai Liang, Xi-Hua Xia May 2008

Preparation Of Zn-Ni Alloy Whisker By Electrochemical Method, Zhen-Hai Liang, Xi-Hua Xia

Journal of Electrochemistry

The Zn-Ni alloy whiskers were prepared by electrochemical method and were characterized by XRD、SEM and EDS methods.The results showed that Ni5Zn21 and Ni3Zn22 whiskers were obtained with the length of 2~4 μm and the diameter of 250 nm,thereby the rations of length/diameter fell between 8 and 16.The electrochemical behavior was investigated by cyclic voltammetry method simultaneously.A new method was provided on whisker preparation based on this work.


Electrocatalytic Performance Of Pt/C And Pt/Wo_3/C Catalysts For Methanol Oxidation, Yuan-Yuan Chu, Bing Wu, Ya-Wen Tang, Tian-Hong Lu, Ying Gao May 2008

Electrocatalytic Performance Of Pt/C And Pt/Wo_3/C Catalysts For Methanol Oxidation, Yuan-Yuan Chu, Bing Wu, Ya-Wen Tang, Tian-Hong Lu, Ying Gao

Journal of Electrochemistry

The catalysts of Carbon supported Pt(Pt/C) and carbon supported Pt/WO3(Pt/WO3/C) were prepared with liquid phase reduction method.It was found that the catalytic activity and stability of the Pt/WO3/C catalysts were increased with the addition of WO3.When the atomic ratio of Pt and W was 1∶1,the best electrocatalytic performance of the Pt/WO3/C catalyst for the methanol oxidation was obtained.This is attributed to the larger electrochemical surface area of Pt/WO3/C and the weeker adsorption of CO towards the catalyst.


Synthesis And Electrochemical Characteristics Of Li[Li_(0.167)Mn_(0.583)Ni_(0.25)]O_2 Cathode Material, Ling-Yan Yu, Wei-Hua Qiu, Fang Lian, Jia-Yuan Huang, Xao-Li Kang, Wei Liu May 2008

Synthesis And Electrochemical Characteristics Of Li[Li_(0.167)Mn_(0.583)Ni_(0.25)]O_2 Cathode Material, Ling-Yan Yu, Wei-Hua Qiu, Fang Lian, Jia-Yuan Huang, Xao-Li Kang, Wei Liu

Journal of Electrochemistry

The cathode material of Li[Li0.167Mn0.583Ni0.25]O2 was synthesized by low-heat solid state reaction.The results of XRD and FESEM indicated that the powders of the material were well crystallized with the uniform diameters ranging from 60 nm to 100 nm and could be indexed as α-NaFeO2 structure(R3-m space).Galvanostatic charge-discharge tests showed that the electrode delivered the capacity of about 120 mAh/g with good cyclability when cycled in 2.5~4.4V at 0.5C.When the cut-off potential was set up to 4.6V,the cathode delivered much larger capacities with the maximum of 234 mAh/g.It was observed that the discharge capacity gradually increased with the increment of the …


Electroless-Deposition Synthesis Of Highly Active Ptru/C And Ptrusn/C As Anode Catalysts For Defc, Jing Zhu, Yi Su, Hua Ma, Fang-Yi Cheng, Zhan-Liang Tao, Jing Liang, Jun Chen May 2008

Electroless-Deposition Synthesis Of Highly Active Ptru/C And Ptrusn/C As Anode Catalysts For Defc, Jing Zhu, Yi Su, Hua Ma, Fang-Yi Cheng, Zhan-Liang Tao, Jing Liang, Jun Chen

Journal of Electrochemistry

In this paper,the preparation,characterization,and ethanol electrocatalytic oxidation of Pt0.5Ru0.5/C and Pt0.5Ru0.15Sn0.35/C electrocatalysts were reported.The electroless-deposition with sensitization-activation pretreatment was applied to prepare Pt0.5Ru0.5/C and Pt0.5Ru0.15Sn0.35/C electrocatalysts. The XRD and TEM analyses showed that the as-prepared catalysts were composed of well-dispersed PtRu or PtRuSn nanoparticles with an average particle size of about 3 nm.The electrochemical measurements demonstrated that the as-prepared Pt0.5Ru0.5/C and Pt0.5Ru0.15Sn0.35/C catalysts exhibited much enhanced peak current density for ethanol electrooxidation as compared to that synthesized without pretreatment.This result revealed that the pretreatment is favorable to the dispersion,size distribution and alloy degree of the nanocatalysts on the carbon support.In …


Preparation And Catalytic Activity Of Nanostructured Pd And Au-Pd Thin Films, Cui-Cui Qiu, Jin-Tao Zhang, Fang Tian, Hou-Yi Ma May 2008

Preparation And Catalytic Activity Of Nanostructured Pd And Au-Pd Thin Films, Cui-Cui Qiu, Jin-Tao Zhang, Fang Tian, Hou-Yi Ma

Journal of Electrochemistry

The nanostructured Pd thin films were directly formed on the glassy carbon electrode(GCE) substrates by using potential cycling method.The as-prepared Pd thin films deposited onto the GCE were able to absorb enough amount of hydrogen in acidic solutions at the cathodic potentials more negative than the hydrogen evolution potential.Moreover,the absorbed hydrogen could be used as the reducing agent to reduce gold(III) ions to Au nanoclusters,thereby forming bimetallic Au-Pd thin films on the GCE substrate.SEM and cyclic voltammetry characterization demonstrated that the Au-Pd thin films display much higher catalytic activity towards the electro-oxidation of ethanol than the pure Pd thin films.


Influence Of Assembly Force In A Pemfc Under A Lifetime Test, Fan Xu, Xuan Cheng, Ying Zhang, Qin-Bai Fan May 2008

Influence Of Assembly Force In A Pemfc Under A Lifetime Test, Fan Xu, Xuan Cheng, Ying Zhang, Qin-Bai Fan

Journal of Electrochemistry

The lifetime performance was investigated by assembling the single cell of PEMFC under a series of holding forces ranging from 0.45 to 11.3 MPa and reassembled under optimal holding force.The polarization and power density curves were obtained during different periods of operating time up to 2000 hours and the fuel cell catalyst activation regions in the polarization curves were analyzed to evaluate the electrochemical kinetic parameters.The results revealed that the holding forces affected not only the internal contact resistances,but also the kinetic parameters which might be caused by the change of the MEA microstructures.The apparent degradation observed at higher current …


Passivation Behaviors Of Mo,W Electrodes In Mgcl_2-Kcl-Nacl-Cacl_2 Molten Salt For Electrolysis Of Magnesium, Chen Ye, Ye Ke May 2008

Passivation Behaviors Of Mo,W Electrodes In Mgcl_2-Kcl-Nacl-Cacl_2 Molten Salt For Electrolysis Of Magnesium, Chen Ye, Ye Ke

Journal of Electrochemistry

The discharge process and passivation behaviors of Mg(Ⅱ) on cathode(Mo、W) in MgCl2-KCl-NaCl-CaCl2 molten salt system had been investigated by means of cyclic voltammetry and chronoamperometry.The composition of molten salt was MgCl(10%)+CaCl(20%)+NaCl(60%)+KCl(10%)(by mass) and the temperature of electrolysis was 725 ℃.The deposition potential of Mo was 37 mV more negative than that of W,while the peak current was sharper than Mo according to the voltammograms at 0.05 V/s,indicating that the passivation on Mo cathode is easier than W.The formation of MgO impurities during the electrolysis could cause the cathode passiration.However,the reversibility on the discharge reaction of W cathode was better than …


Quick Tester With Usb Interface For The Corrosion Protection Properties Of Organic Coating, Xiang-Dong Zhuo, Chang-Jian Lin May 2008

Quick Tester With Usb Interface For The Corrosion Protection Properties Of Organic Coating, Xiang-Dong Zhuo, Chang-Jian Lin

Journal of Electrochemistry

According to the principle of multiple dynamic potential scaning polarization,a quick tester with USB interface for the fast study of corrosion resistance properties of organic coating/ metal system has been developed.This tester is portable,facile,practical,and has a strong function for data collection and data treatment.It is not only suitable for the accelerated test in laboratory,but also for the quick test and evaluation to the corrosion resistance of the organic coating/metal system in industrial spots.