Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics Commons™

Open Access. Powered by Scholars. Published by Universities.®

2017

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 12061 - 12090 of 12521

Full-Text Articles in Physical Sciences and Mathematics

An Alternative Approach To The Design Of Multiple Beam Constrained Lens Antennas, Rasi̇me Uyguroğlu, Abdullah Yücel Öztoprak Jan 2017

An Alternative Approach To The Design Of Multiple Beam Constrained Lens Antennas, Rasi̇me Uyguroğlu, Abdullah Yücel Öztoprak

Turkish Journal of Electrical Engineering and Computer Sciences

Rotman lenses are constrained lenses that are used as beam-forming networks to feed array antennas. Their design is based on three focal points, producing three beams with perfect phase fronts. This paper introduces an alternative constrained lens, which has phase equality at five radiating array elements for each beam position. In addition, the center point of the feed curve produces a perfect beam at broadside. The performance of this lens is analyzed and compared to the conventional Rotman lens. The analysis demonstrates that the new lens has better phase performance for wide angle designs. Our study shows that the phase …

Go to article

Access Pattern-Aware Data Placement For Hybrid Dram/Nvm, Di̇dem Unat Erten Jan 2017

Access Pattern-Aware Data Placement For Hybrid Dram/Nvm, Di̇dem Unat Erten

Turkish Journal of Electrical Engineering and Computer Sciences

In recent years, increased interest in data-centric applications has led to an increasing demand for large-capacity memory systems. Nonvolatile memory (NVM) technologies enable new opportunities in terms of process-scaling and energy consumption, and have become an attractive memory technology that serves as a secondary memory at low cost. However, NVM has certain disadvantages for write references, due to its high dynamic energy consumption for writes and low bandwidth compared to DRAM writes. In this paper, we propose an access-aware placement of objects in the application code for two types of memories. Given the desired power savings and acceptable performance loss, …

Go to article

Mri Image Enhancement Using Biot-Savart Law At 3 Tesla, Yunus Emre Esi̇n, Ferda Nur Alpaslan Jan 2017

Mri Image Enhancement Using Biot-Savart Law At 3 Tesla, Yunus Emre Esi̇n, Ferda Nur Alpaslan

Turkish Journal of Electrical Engineering and Computer Sciences

Coil sensitivity is considered as the most valuable data in the parallel reconstruction of magnetic resonance imaging (MRI). In this study, a novel coil sensitivity map extraction method is introduced for spatially fixed phased array coils. The proposed technique uses the Biot--Savart law with coil internal shape information and low-resolution phase image data to form sensitivity maps. The performance of this method is tested in a parallel image reconstruction task, using the sensitivity-encoding (SENSE) technique. Under the quasi-static assumption and using the duality principle, we computed the sensitivity maps of a phased-array head coil and reconstructed full FOV images. The …

Go to article

A Fast Feature Selection Approach Based On Extreme Learning Machine And Coefficient Of Variation, Ömer Faruk Ertuğrul, Mehmet Emi̇n Tağluk Jan 2017

A Fast Feature Selection Approach Based On Extreme Learning Machine And Coefficient Of Variation, Ömer Faruk Ertuğrul, Mehmet Emi̇n Tağluk

Turkish Journal of Electrical Engineering and Computer Sciences

Feature selection is the method of reducing the size of data without degrading their accuracy. In this study, we propose a novel feature selection approach, based on extreme learning machines (ELMs) and the coefficient of variation (CV). In the proposed approach, the most relevant features are identified by ranking each feature with the coefficient obtained through ELM divided by CV. The achieved accuracies and computational costs, obtained with the use of features selected via the proposed approach in 9 classification and 26 regression benchmark data sets, were compared to those obtained with all features, as well as those obtained with …

Go to article

An Rc-Triggered Esd Clamp For High-Voltage Bcd Cmos Processes, Fati̇h Koçer Jan 2017

An Rc-Triggered Esd Clamp For High-Voltage Bcd Cmos Processes, Fati̇h Koçer

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a novel RC-triggered, field-effect transistor (FET)-based power clamp that can be used in high-voltage complementary metal oxide semiconductor (CMOS) processes. A simple two-stage design provides a fast trigger while keeping the clamp transistor on for much longer than the triggering duration without the need for an additional digital latching circuit. As the presented technique does not require any digital circuits, it is especially useful in bipolar-CMOS-DMOS (BCD) processes, where the implementation of digital blocks is difficult due to the limited gate-to-source voltage of the laterally diffused metal oxide semiconductor (LDMOS) transistors. The proposed architecture is implemented in …

Go to article

E-Mfdbscan: An Evolutionary Clustering Algorithm For Gene Expression Time Series, Atakan Erdem, Taflan İmre Gündem Jan 2017

E-Mfdbscan: An Evolutionary Clustering Algorithm For Gene Expression Time Series, Atakan Erdem, Taflan İmre Gündem

Turkish Journal of Electrical Engineering and Computer Sciences

DNA microarray experiments are frequently used because they have various advantages. However, gene expression data from DNA microarray experiments are noisy, and, consequently, the computations that are based on such noisy data may lack accuracy. In this paper, an evolutionary uncertain data-clustering algorithm, E-MFDBSCAN, and a prediction model using E-MFDBSCAN for uncertain data are proposed. The proposed methodology may be successfully applied to noisy gene expression data. In this methodology, global patterns of time series data can be extracted using our evolutionary clustering approach. These patterns are used to infer future projections. In the proposed methodology, an autoregressive time series …

Go to article

Relaxation Rate And Polarization Charge Density Model For Aln/Al$_{X}$Ga$_{1 - X}$N/Aln Heterostructures, Nagarajan Sivarajan, Reeba Korah, Mariya Kalavathy Ganamani Jan 2017

Relaxation Rate And Polarization Charge Density Model For Aln/Al$_{X}$Ga$_{1 - X}$N/Aln Heterostructures, Nagarajan Sivarajan, Reeba Korah, Mariya Kalavathy Ganamani

Turkish Journal of Electrical Engineering and Computer Sciences

This work describes the strain-relaxation--dependent carrier concentration ($n_{s})$ profile model using spontaneous and piezoelectric polarization for AlN/Al$_{x}$Ga$_{1 - x}$N/AlN HEMTs in all mole fraction ($x)$ interpolations. As $x$ varies, the Aluminum Gallium Nitride (AlGaN) channel shows strain relaxation with the Aluminum Nitride (AlN) barrier. The degree of relaxation is modeled from AlN to GaN regions in the channel. It shows that the AlN barrier and buffer relaxation and strain recovery occurs due to the gradual crystal quality degradation from barrier/buffer to the channel interface. These combination devices show less drain current degradation with temperature variation from 300 K to 573 …

Go to article

Modeling And Simulation Of 2.5 Mva Sf6-Gas-Insulated Transformer, Okan Özgönenel, David Thomas Jan 2017

Modeling And Simulation Of 2.5 Mva Sf6-Gas-Insulated Transformer, Okan Özgönenel, David Thomas

Turkish Journal of Electrical Engineering and Computer Sciences

In recent years, environmental awareness has been a great concern, and even governments have sometimes been under pressure to comply with bilateral agreements. Mineral oil/epoxy cast resins are one of the most harmful soil pollutants. Of course, they provide a good insulation material in (distribution/power) transformers, but they present some disadvantages, such as low ignition point, additional insulation costs, requirement for an extinguishing apparatus, long clearance distance, toxicity, costly decontamination, and explosion risk. For this reason, gas-insulated transformers have nowadays been put into specifications. % This paper investigates SF6-gas-insulated transformer (GIT) designs for the complex distribution transformer model, i.e. 2.5 …

Go to article

A New And Secure Digital Image Scrambling Algorithm Based On 2d Cellular Automata, Gi̇zem Dursun, Fadi̇me Özer, Ufuk Özkaya Jan 2017

A New And Secure Digital Image Scrambling Algorithm Based On 2d Cellular Automata, Gi̇zem Dursun, Fadi̇me Özer, Ufuk Özkaya

Turkish Journal of Electrical Engineering and Computer Sciences

In this work, a new and secure digital image scrambling algorithm for grayscale images is presented. The main goal of this algorithm is to change and reorder the positions of the pixel values of the grayscale images according to the rules of Conway's Game of Life. For this purpose, an image scrambling matrix is proposed. The proposed algorithm is mostly applied to known benchmark images of various sizes and histograms. Moreover, the proposed algorithm is applied to noisy and low-contrast images to evaluate the performance of the algorithm in consumer applications. The scrambling performance of the algorithm is examined through …

Go to article

Numerical Study Of Ac Loss Of Two-Layer Hts Power Transmission Cables Composed Of Coated Conductors With A Ferromagnetic Substrate, Şükrü Yildiz, Fedai̇ İnanir, Ahmet Çi̇çek, Fedor Gömöry Jan 2017

Numerical Study Of Ac Loss Of Two-Layer Hts Power Transmission Cables Composed Of Coated Conductors With A Ferromagnetic Substrate, Şükrü Yildiz, Fedai̇ İnanir, Ahmet Çi̇çek, Fedor Gömöry

Turkish Journal of Electrical Engineering and Computer Sciences

This work includes the simulation of hysteretic AC losses in two-layer HTS power transmission cables made of second-generation high-temperature superconducting tapes with a ferromagnetic substrate subject to an oscillating AC transport current, calling upon the COMSOL Multiphysics finite-element software program and exploiting an AC/DC module. How the AC transport loss is influenced by the arrangement of tapes, as well as the optimized design of superconducting power cables based on YBCO-coated conductors, are investigated. According to the radial arrangement of the tapes, four different orientations of ferromagnetic substrate are considered: 1) out-in (substrate of inner/outer layer facing outward/inward), 2) in-out (substrate …

Go to article

Improved Resettable Integrator Control For A Bridgeless Interleaved Ac/Dc Converter, Kanimozhi Gunasekaran, Sreedevi Vellithirothi Thazhathu Jan 2017

Improved Resettable Integrator Control For A Bridgeless Interleaved Ac/Dc Converter, Kanimozhi Gunasekaran, Sreedevi Vellithirothi Thazhathu

Turkish Journal of Electrical Engineering and Computer Sciences

Plug-in hybrid electric vehicles (PHEVs) consist of a front-end boost rectifier, which incorporates a power factor correction (PFC) circuit for battery charging. Bridgeless interleaved (BLIL) PFC boost converter topology is proved as a standard PFC converter as it has high efficiency, reduced input current ripple, and reduced electromagnetic interference (EMI). This paper proposes a digital nonlinear control technique that employs a resettable integrator to shape the input current of the converter in phase with the input voltage to achieve high input power factor. This control approach rejects power source and load perturbations better than linear feedback control methods. This is …

Go to article

A New Word-Based Compression Model Allowing Compressed Pattern Matching, Hali̇l Nusret Buluş, Aydin Carus, Altan Mesut Jan 2017

A New Word-Based Compression Model Allowing Compressed Pattern Matching, Hali̇l Nusret Buluş, Aydin Carus, Altan Mesut

Turkish Journal of Electrical Engineering and Computer Sciences

In this study a new semistatic data compression model that has a fast coding process and that allows compressed pattern matching is introduced. The name of the proposed model is chosen as tagged word-based compression algorithm (TWBCA) since it has a word-based coding and word-based compressed matching algorithm. The model has two phases. In the first phase a dictionary is constructed by adding a phrase, paying attention to word boundaries, and in the second phase compression is done by using codewords of phrases in this dictionary. The first byte of the codeword determines whether the word is compressed or not. …

Go to article

Robust H$\Infty $ Control For Chaotic Supply Chain Networks, Hamid Norouzi Nav, Mohammad Reza Jahedmotlagh, Ahmad Makui Jan 2017

Robust H$\Infty $ Control For Chaotic Supply Chain Networks, Hamid Norouzi Nav, Mohammad Reza Jahedmotlagh, Ahmad Makui

Turkish Journal of Electrical Engineering and Computer Sciences

A supply chain network (SCN) is a complex nonlinear system involving multiple entities. The policy of each entity in decision-making and the uncertainties of demand and supply (or production) significantly affect the complexity of its behavior. Although several studies have presented information about the measurement of chaos in the supply chain, there has not been an appropriate way to control the chaos in it. In this paper, the chaos control problem is considered for a SCN with a time-varying delay between its entities. The innovation of this paper is the more comprehensive modeling, analysis, and control of chaotic behavior in …

Go to article

Adaptive Joint Block-Weighted Collaborative Representation For Facial Expression Recognition, Zhe Sun, Zhengping Hu, Meng Wang, Shuhuan Zhao Jan 2017

Adaptive Joint Block-Weighted Collaborative Representation For Facial Expression Recognition, Zhe Sun, Zhengping Hu, Meng Wang, Shuhuan Zhao

Turkish Journal of Electrical Engineering and Computer Sciences

Facial expression recognition (FER) plays a significant role in human-computer interactions. Recently, regularized linear representation-based classification has achieved satisfying results in FER. Considering that different blocks in a sample should contribute differently to the representation and classification, we propose an adaptive joint block-weighted collaborative representation-based classification (JBW_CRC) method to effectively exploit the similarity and distinctiveness of different blocks. In JBW_CRC, samples are divided into different blocks and each block of the query sample is represented as a feature vector. Each feature vector is coded on its related block dictionary, which considers the similarity among the feature vectors. Additionally, the distinctiveness …

Go to article

Force And Torque Parameter Estimation For A 4-Pole Hybrid Electromagnet By Anfis Hybrid Learning Algorithm, Murat Atlihan, Bariş Can Yalçin, Kadi̇r Erkan Jan 2017

Force And Torque Parameter Estimation For A 4-Pole Hybrid Electromagnet By Anfis Hybrid Learning Algorithm, Murat Atlihan, Bariş Can Yalçin, Kadi̇r Erkan

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a force and torque estimation method based on an adaptive neuro-fuzzy inference system (ANFIS) has been developed to get rid of multiple integral calculations of air gap coefficients that cause time delay for magnetic levitation control applications. During magnetic levitation applications that contain a 4-pole hybrid electromagnet, multiple integral calculations have to be done for obtaining air gap permanence parameters, and these parameters are needed to calculate force and torque parameters that are produced by the poles of the hybrid electromagnet, which means, if time delay occurs for calculation of permanence parameters, actual force and actual torque …

Go to article

Space-Time Block Coded Spatial Modulation Scheme Enhanced By Employing An Intersymbol Phase And Power Allocation, Ahmet Faruk Coşkun Jan 2017

Space-Time Block Coded Spatial Modulation Scheme Enhanced By Employing An Intersymbol Phase And Power Allocation, Ahmet Faruk Coşkun

Turkish Journal of Electrical Engineering and Computer Sciences

This paper provides a brief and insightful examination of the advantages achieved by employing combined phase offsetting and power allocation mechanisms in the space-time block coded (STBC) transmission of spatial modulation schemes with cyclic structure (CSM). In order to achieve increased coding gain distances (CGDs) between transmitted code words (CWs), the power allocation mechanism is cascaded to the constellation mapping process of a STBC-CSM scheme, and the optimal power and phase weights for the conveyed information symbols, together with the phases for each CW, are searched by a heuristic algorithm based on differential evolution that yields the best CGD available …

Go to article

Promoting Peak Shaving While Minimizing Electricity Consumption Payment For Residential Consumers By Using Storage Devices, Simona Oprea, Adela Bara, Mahmut Erkut Cebeci̇, Osman Bülent Tör Jan 2017

Promoting Peak Shaving While Minimizing Electricity Consumption Payment For Residential Consumers By Using Storage Devices, Simona Oprea, Adela Bara, Mahmut Erkut Cebeci̇, Osman Bülent Tör

Turkish Journal of Electrical Engineering and Computer Sciences

Nowadays, smart meters, sensors, and advanced electricity tariff mechanisms such as time-of-use (ToU), critical peak pricing tariff, and real time tariff enable electricity consumption optimization for residential consumers. The main scope of such mechanisms is to promote peak shaving, which leads to minimization of technical losses and avoidance (or delay) of grid onerous investments. This paper proposes a method to determine the optimum capacity of a storage device (SD) that significantly contributes to peak shaving of electricity consumption for residential consumers. Detailed modelling of diverse electric appliances' behavior and consumers' necessities is addressed in order to determine the optimum capacity …

Go to article

The Design Of A Novel And Portable Energy Performance-Measuring Device For Household Refrigerators, İlhan Koşalay, Okan Bi̇ngöl, Hakki Gökhan İlk, Mahmut Yildirim, Burçi̇n Özkaya Jan 2017

The Design Of A Novel And Portable Energy Performance-Measuring Device For Household Refrigerators, İlhan Koşalay, Okan Bi̇ngöl, Hakki Gökhan İlk, Mahmut Yildirim, Burçi̇n Özkaya

Turkish Journal of Electrical Engineering and Computer Sciences

Refrigerators are one of the main devices used in our daily lives, and they play important roles in storing food and maintaining its freshness. Refrigerator manufacturing is improving day by day and it is important for the appliance to present a diverse array of functions to its users, since usage requirements vary from region to region. For this purpose, refrigerators must pass through various performance tests like an energy efficiency test while they are produced in factories. Factories have designated testing rooms for these performance tests. After the products' release, technical services and customers do not have such a luxury …

Go to article

Using The Variable Width In A Planar Inductor On Kapton For Optimizing Its Performance, Hayet Kharbouch, Azzedine Hamid, Thierry Lebey, Vincent Bley, Leon Havez, Celine Combette Jan 2017

Using The Variable Width In A Planar Inductor On Kapton For Optimizing Its Performance, Hayet Kharbouch, Azzedine Hamid, Thierry Lebey, Vincent Bley, Leon Havez, Celine Combette

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, we examine the design of planar inductors and consider an expansion of the conductor to reduce its resistance. An increase in the number of turns increases the proximity effect, capacitive coupling, and skin effect. The resulting effect will translate into an increase in the area occupied by the inductor and a decrease in the inductors' performances. In order to solve such difficulties, an alternative approach is to design tapered inductors. For the same electrical and geometrical characteristics, a tapered inductor occupies a larger area than a standard inductor. Our approach consists of designing a new concept regarding …

Go to article

High Inductance Fractal Inductors For Wireless Applications, Akhendra Kumar Padavala, Bheema Rao Nistala Jan 2017

High Inductance Fractal Inductors For Wireless Applications, Akhendra Kumar Padavala, Bheema Rao Nistala

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents fractal-based inductors for industrial, scientific, and medical applications in a frequency range of 3--500 MHz. The proposed inductors are designed based on the Hilbert space-filling curve and omega-shaped space-filling curve. The fractal inductors are designed and simulated by using a full wave high frequency structural simulator. The Hilbert curve-based fractal loop inductor and omega curve-based fractal loop inductor achieve improvements in the inductance value of 21% to 31% and 11% to 30.88%, respectively, over reported standard inductors. The printed inductors are constructed on 3.2 mm RT/Duroid 5770 substrate and measured with a network analyzer (E8363B). It was …

Go to article

Experimental Analysis Of The Temperature Dependence Of The Brillouin Gain Spectrum In Short-Length Single-Mode Fiber, Murat Yücel, Hali̇m Haldun Göktaş, Murat Yücel, Nai̇l Ferhat Öztürk, Abdullah Erkam Gündüz Jan 2017

Experimental Analysis Of The Temperature Dependence Of The Brillouin Gain Spectrum In Short-Length Single-Mode Fiber, Murat Yücel, Hali̇m Haldun Göktaş, Murat Yücel, Nai̇l Ferhat Öztürk, Abdullah Erkam Gündüz

Turkish Journal of Electrical Engineering and Computer Sciences

The Brillouin backscattered wave was examined in a short-length single-mode fiber at different ambient temperatures using a 1553-nm wavelength laser source. To obtain Brillouin scattering depending on the temperature change in a 95-m long single-mode fiber cable, the Brillouin optical time domain reflectometry (BOTDR) technique was used. In this technique, a 1553 nm wavelength signal was sent from one side of the test fiber. The FC/APC connector was attached to the other end of the test fiber. The temperature parameters of the single-mode fiber cables of different brands and types can be obtained using Brillouin scattering. The Brillouin frequency shift …

Go to article

Concurrent Optimal Design Of Tcsc And Pss Using Symbiotic Organisms Search Algorithm, Muwaffaq Alomoush Jan 2017

Concurrent Optimal Design Of Tcsc And Pss Using Symbiotic Organisms Search Algorithm, Muwaffaq Alomoush

Turkish Journal of Electrical Engineering and Computer Sciences

The symbiotic organisms search (SOS), which has been recently introduced, is a robust powerful metaheuristic global optimizer. This nature-inspired algorithm imitates the symbiotic interaction strategies in an ecosystem exercised by organisms involved in interrelationships to survive and reproduce. One of the main beneficial features of the SOS in contrast to many other competent metaheuristic algorithms is that the algorithm does not need any specific algorithm parameters or tuning process. This paper applies the SOS algorithm to simultaneously design optimal controllers of a power system equipped with both a power system stabilizer (PSS) and a thyristor-controlled series compensator (TCSC). The algorithm …

Go to article

Inverse Kinematics Of A 7-Dof Redundant Robot Manipulator Using The Active Set Approach Under Joint Physical Limits, Modjtaba Rouhani, Sima Ebrahimabadi Jan 2017

Inverse Kinematics Of A 7-Dof Redundant Robot Manipulator Using The Active Set Approach Under Joint Physical Limits, Modjtaba Rouhani, Sima Ebrahimabadi

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a new approach for an online solution of the inverse kinematics problem based on nonlinear optimization for robots with joint physical constraints. The inverse kinematics problem is stated as a constrained nonlinear optimization problem and is solved using Kuhn--Tucker conditions analysis. The nonlinear multivariable optimization problem is locally converted into independent local linear constrained subproblems and each subproblem is analytically solved. For each joint, position limits and velocity limits are considered as physical constraints. The proposed structure benefits from a very low complexity design. The proposed method is fast and requires few calculations. The convergence of the …

Go to article

A Model Of Optimal Burst Assembly For Delay Reduction At Ingress Obs Nodes, Viet Minh Nhat Vo, Van Hoa Le, Hoang Son Nguyen Jan 2017

A Model Of Optimal Burst Assembly For Delay Reduction At Ingress Obs Nodes, Viet Minh Nhat Vo, Van Hoa Le, Hoang Son Nguyen

Turkish Journal of Electrical Engineering and Computer Sciences

Burst assembly plays an important role in reducing the end-to-end delay of packets transported through optical burst switching (OBS) networks. Several methods have been proposed to reduce the delay of the packets buffered at ingress OBS nodes. However, these have created significant estimation errors, which result in wasting the reserved bandwidth or increasing the delay of excess packets. In this paper, we propose a model of optimal burst assembly for delay reduction, which minimizes the estimation error, eliminates the excess packets, and decreases the blocking probability of scheduling.

Go to article

Low-Frequency Exposure Analysis Using Electric And Magnetic Field Measurements And Predictions In The Proximity Of Power Transmission Lines In Urban Areas, Hamza Feza Carlak, Şükrü Özen, Süleyman Bi̇lgi̇n Jan 2017

Low-Frequency Exposure Analysis Using Electric And Magnetic Field Measurements And Predictions In The Proximity Of Power Transmission Lines In Urban Areas, Hamza Feza Carlak, Şükrü Özen, Süleyman Bi̇lgi̇n

Turkish Journal of Electrical Engineering and Computer Sciences

In recent years, increasing energy demand has resulted in more loading in power transmission lines and correspondingly more electric and magnetic field occurrence. In this paper, electric and magnetic field levels around high voltage power transmission lines are measured and then calculated analytically by simulating the realistic case. Moreover, the field levels around these power lines have been predicted using multilayer perceptron artificial neural network (ANN) and generalized regression neural network models. Typical 154 kV power transmission line facilities of Turkey have been studied. Electric and magnetic field levels in the proximity of power transmission lines have been predicted with …

Go to article

Design Of A Sharp Response Microstrip Lowpass Filter Using Taper Loaded And Radial Stub Resonators, Sohrab Majidifar, Mohsen Hayati Jan 2017

Design Of A Sharp Response Microstrip Lowpass Filter Using Taper Loaded And Radial Stub Resonators, Sohrab Majidifar, Mohsen Hayati

Turkish Journal of Electrical Engineering and Computer Sciences

This paper proposes a compact microstrip lowpass filter with a wide stopband and a very sharp roll-off. This structure consists of two dual taper-loaded resonators that are connected to the radial stubs. The resonators are described using an LC model, and its Z- and S-parameters are extracted as a function of the LC component. In the proposed filter, cut-off frequency is placed at 1.76 GHz, roll-off rate is higher than 142 dB/GHz, insertion loss is less than 0.42 dB from DC to 1.5 GHz, and rejection is greater than -24 dB from 1.88 to 15.2 GHz. The proposed filter is …

Go to article

A Low Power Memoryless Rom Design Architecture For A Direct Digital Frequency Synthesizer, Salah Alkurwy, Sawal Ali, Md.Shabiul Islam, Md. Faizul Idros Jan 2017

A Low Power Memoryless Rom Design Architecture For A Direct Digital Frequency Synthesizer, Salah Alkurwy, Sawal Ali, Md.Shabiul Islam, Md. Faizul Idros

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a novel, memoryless, read-only memory (ROM) design architecture for a direct digital frequency synthesizer (DDFS). A pipelining technique is proposed to increase the phase accumulator (PA) throughput. However, this technique increases the number of registers as the pipeline stages increase. The shifted clocking technique is used to reduce the pipelined PA registers. The wave symmetry technique is applied to store (0: $\pi $/2) of the sine wave. The ROM is partitioned into three four-bit sub-ROMs based on the angular decomposition technique and trigonometric identity. A novel approach of memoryless ROM design technique is proposed and implemented in …

Go to article

Broadband High Power Stripline Compact Multisection Coupled-Line Coupler For Vhf And Uhf Applications, Mehdi Taherkhani, Arash Ahmadi Jan 2017

Broadband High Power Stripline Compact Multisection Coupled-Line Coupler For Vhf And Uhf Applications, Mehdi Taherkhani, Arash Ahmadi

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a broadband stripline multisection coupled-line coupler is designed and fabricated. The coupler has 50 dB coupling in the frequency range of 30 to 1000 MHz. The coupler is designed by cascading several unit section couplers consisting of two unequal length coupled line sections connected by different length uncoupled transmission lines. The unequal length coupled line sections with different coupling coefficients introduce a degree of freedom for bandwidth improvement and can help to reduce the overall dimensions of the multisection coupler. A lumped-element compensating circuit is used in series with the coupling port of the coupler to flatten …

Go to article

Multiresponse Optimization To Improve The Torque Behavior Of An Outer-Rotor Permanent-Magnet Machine Using Gray Relational Analysis Based On The Taguchi Method, Yusuf Özoğlu Jan 2017

Multiresponse Optimization To Improve The Torque Behavior Of An Outer-Rotor Permanent-Magnet Machine Using Gray Relational Analysis Based On The Taguchi Method, Yusuf Özoğlu

Turkish Journal of Electrical Engineering and Computer Sciences

The torque behavior of an outer-rotor surface-mounted permanent-magnet machine is improved by identifying seven pertinent design variables, including rotor height. The optimal design variables are revealed by analyzing 18 experiments determined by the Taguchi method for the minimum torque ripple, minimum total harmonic distortion of the induced voltage, and maximum average torque. In addition, the optimal design variables are obtained very quickly by using gray relational analysis based on the Taguchi method with the single response of the gray relational grade instead of multiple responses. A considerable amount of multiresponse improvement is achieved according to the results of the two …

Go to article

Study And Analysis Of New Pulsed Electric Field Treatment Chamber Configurations For Food Extraction, Yassine Bellebna, Hamza Bermmaki, Abedelkader Semmak, Abdelkader Chaker, Amar Tilmatine Jan 2017

Study And Analysis Of New Pulsed Electric Field Treatment Chamber Configurations For Food Extraction, Yassine Bellebna, Hamza Bermmaki, Abedelkader Semmak, Abdelkader Chaker, Amar Tilmatine

Turkish Journal of Electrical Engineering and Computer Sciences

In all treatment chamber (TC) models used in industry and in research laboratories, the product to be treated is placed in one volume unit delimited between two electrodes energized by a pulsed voltage and the electric field lines are monoaxial and perpendicular to the electrodes. The objective of this paper is to perform an experimental analysis, based on the pulsed electric field-treated beet juice extraction efficiency, of two TC new configurations. The first model is constituted of one, two, or three parallel PEF units comprising several alternate ground-HV electrodes. The treatment chambers made of Plexiglas have a square parallelepipedic shape, …

Go to article

First Prev Next Last