Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- Cyclic voltammetry (74)
- Electrocatalysis (67)
- Electrodeposition (62)
- Electrochemistry (61)
- Lithium ion battery (59)
-
- Oxygen reduction reaction (52)
- Supercapacitor (44)
- Electrochemical performance (38)
- Cathode material (37)
- Corrosion (35)
- Lithium-ion battery (32)
- Lithium-ion batteries (31)
- Fuel cell (29)
- Electrochemical impedance spectroscopy (28)
- Lithium ion batteries (26)
- Modified electrode (24)
- Polyaniline (20)
- Anode (19)
- Anode materials (19)
- Carbon nanotubes (19)
- Cathode (19)
- EIS (19)
- Anode material (18)
- Cathode materials (18)
- Electrolyte (18)
- Li-ion battery (18)
- Electrochemical behavior (17)
- Electrocatalyst (16)
- Electrochemical oxidation (16)
- Fuel cells (16)
- Publication Year
Articles 1111 - 1140 of 2294
Full-Text Articles in Physical Sciences and Mathematics
Electrochemical Behaviors Of Hydrazine In Bmimpf_6 Solution At Ag Electrode, Jie Sun, Yan Li, Yi-Ling Feng, Rong Wang, Xia-Qin Wu
Electrochemical Behaviors Of Hydrazine In Bmimpf_6 Solution At Ag Electrode, Jie Sun, Yan Li, Yi-Ling Feng, Rong Wang, Xia-Qin Wu
Journal of Electrochemistry
In this work,the electrochemical behaviors of hydrazine at Ag electrode in the room temperature ionic liquid,BmimPF6,were studied by cyclic voltammetry. Results suggested that Ag electrode showed a good catalytic activity towards hydrazine oxidation. The catalytic peak current showed a good linear relationship with the hydrazine concentration in the range of 0 ～ 3. 4 mmol/L. The rate-determining step of the electrocatalytic reaction involved one electron transfer form hydrazine molecule to Ag + ion.
Blocking Method In Enzyme-Amplified Amperometric Dna Biosensor, Miao He, Wei Chen, Xiong-Wei Xu, Ai-Lin Liu, Xin-Hua Lin
Blocking Method In Enzyme-Amplified Amperometric Dna Biosensor, Miao He, Wei Chen, Xiong-Wei Xu, Ai-Lin Liu, Xin-Hua Lin
Journal of Electrochemistry
Non-specific absorption of enzyme and nucleotide is a main source leading to the background staining in enzyme-amplified amperometric detection of DNA. To eliminate the background staining in this system, the blocking procedure by mercapto-hexanol ( MCH) and bovine serum albumin ( BSA) was studied systematically. The results show that the anti-fouling effect of BSA is better than that of MCH. A simple and efficient blocking strategy employing BSA as the sole blocking reagent was established and applied in the detection of PMLRARα fusion gene in acute promyelocytic leukemia. It can effectively eliminate the background staining,shorten the pre-processing time,and achieve strong …
Self-Activating Safety Mechanisms For Li-Ion Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang
Self-Activating Safety Mechanisms For Li-Ion Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang
Journal of Electrochemistry
The safety concerns of LIBs are considered to be a main obstacle to their high rate or large capacity applications in electric vehicles.This paper describes briefly our research works on the development of self-activating safety mechanisms for LIBs,including redox shuttle,potential-sensitive separator,temperature-sensitive electrode,and fire-retardent electrolyte.The problems and future in this research area are also discussed.
Preparation And Characterizations Of Li_3v_2(Po_4)_3 Cathode Material For Lithium Ion Batteries, Hong Chen, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei
Preparation And Characterizations Of Li_3v_2(Po_4)_3 Cathode Material For Lithium Ion Batteries, Hong Chen, Tao Jiang, Chun-Zhong Wang, Gang Chen, Ying-Jin Wei
Journal of Electrochemistry
The carbon-coated Li3V2(PO4)3 was prepared by carbothermal reduction method.The structural and morphological properties of the material were studied by X-ray diffraction,FTIR and transmission electron microscopy.The synthesized material was a pure phase of Li3V2(PO4)3,with the particle size of about 100 nm.The values of Li ion diffusion coefficient of the material in the potential window of 3.0 ～ 4.3 V were nearly 3 orders larger than those in 3.0 ～ 4.8 V.In addition,the charge-transfer resistances in 3.0 ～ 4.3 V were much smaller than those in 3.0 ～ 4.8 V,leading to apparent improvement in cycling performance.This was mainly attributed to the smaller …
Effects Of Different Carbon Sources On Performance Of Li_3v_2(Po_4)_3/C Composite Cathode Materials, Kai-Yuan Liu, Jian-Shu Huang, Li Yang
Effects Of Different Carbon Sources On Performance Of Li_3v_2(Po_4)_3/C Composite Cathode Materials, Kai-Yuan Liu, Jian-Shu Huang, Li Yang
Journal of Electrochemistry
The monoclinic Li3V2(PO4)3 cathode materials were prepared by carbothermal reduction method,with methyl cellulose,chitosan(crab shells) or glucose anhydrous as carbon sources,respectively.The crystal structures,morphologies and the electrochemical performances were characterized by XRD,SEM and electrochemical measurement.The XRD patterns show that the samples obtained at 800 ℃ for 6 h have a pure monoclinic structure,which indicates that the carbon exists in amorphous phase.Electrochemical measurements show that the difference of carbon sources has a significant influence on the electrochemical properties of the materials.The Li3V2(PO4)3 /C with methyl cellulose as the reduction agent has the best electrochemical performance.In the voltage range of 3.0 ～ 4.5 V …
Electrochemical Properties Of Ni(Oh)_2 Doped By Nio, Fei-Biao Chen, Bo-Rong Wu, Wei-Feng An, Zhao-Jun Yang, Feng Wu, Shi Chen
Electrochemical Properties Of Ni(Oh)_2 Doped By Nio, Fei-Biao Chen, Bo-Rong Wu, Wei-Feng An, Zhao-Jun Yang, Feng Wu, Shi Chen
Journal of Electrochemistry
The Ni(OH)2 cathode material of MH/Ni was doped by NiO,which behaves as a capacitor and can improve the charge-discharge rate capacity of Ni(OH)2.The electrochemical properties of Ni(OH)2 was characterized by charge-discharge curves and cyclic voltammetry.The results showed that the material had the best discharge property when doped by 5% NiO,and the discharge specific capacity could reach 310.1 mAh/g at 0.2 C rate and remianed 79.5% at 3 C rate.The difference oxidation and reduction potentials between the of the battery was 164 mV when the Ni(OH)2 was doped by 5% NiO,which showed a good cyclic property.
Investigation Of Ceo_2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan
Investigation Of Ceo_2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan
Journal of Electrochemistry
The performance of CeO2 as oxygen reduction electrocatalyst in direct borohydride fuel cell was investigated.The experimental results indicate that CeO2 shows significant electrocatalytic performance for oxygen reduction and exhibits no observed promotion effect on hydrolysis or electro-oxidation of BH 4-.The power density of experimental one-compartment fuel cell with CeO2 as cathode electrocatalyst can reach a 67.8 mW·cm-2 at room temperature.
Preparation And Electrochemical Behavior Of Li_4ti_5o_(12) Nanosheets As Anode Material For Lithium Ion Battery, Yi-Fei Wang, Yu-Feng Tang, Zheng Qiu, Li Yang
Preparation And Electrochemical Behavior Of Li_4ti_5o_(12) Nanosheets As Anode Material For Lithium Ion Battery, Yi-Fei Wang, Yu-Feng Tang, Zheng Qiu, Li Yang
Journal of Electrochemistry
Spinel lithium titanate(Li4Ti5O12) nanosheets with a size range of 200 ～400 nm were synthesized by hydrothermal process from the amorphous hydrous titanium oxide precursors.The as-prepared products were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The electrochemical behaviors of Li4Ti5O12 electrode in conventional organic electrolyte and ionic liquid electrolyte were investigated by using cyclic voltammetry,galvanostatic charge-discharge and AC impedance techniques.The experimental results indicate that the as-prepared nanostructured Li4Ti5O12,evaluated as anode material,exhibited good reversibility and cycle performance.It is expected to be a potential anode material for commerical battery applications.
Synthesis Of High-Performance Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng
Synthesis Of High-Performance Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng
Journal of Electrochemistry
Layered LiNi1/3Co1/3Mn1/3O2 is one of the most promising alternative materials for LiCoO2 in lithium ion batteries due to its low cost,large capacity and excellent cyclability.In this paper,LiNi1/3 Co1/3 Mn1/3 O2 was synthesized via azeotropic distillation method with isobutyl alcohol as an azeotropic agent.The structure and surface morphology were characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM),respectively.The as-prepared LiNi1/3Co1/3Mn1/3O2 shows a layered α-NaFeO2 structure;the particles are small and uniformly distributed.As compared with the sample prepared by traditional method,the present cathode material exhibits superior cyclability and rate capability,which can be ascribed to the enhanced Li + diffusion due to smaller and more …
Electrochemical Behavior Of Co-Ru Composite In Alkaline Solution, Su-Mei Yao, Guo-Chun Li, Xue-Ping Gao
Electrochemical Behavior Of Co-Ru Composite In Alkaline Solution, Su-Mei Yao, Guo-Chun Li, Xue-Ping Gao
Journal of Electrochemistry
The electrochemical properties of Ru doped cobalt hydroxides synthesized via homogeneous chemical co-precipitation were investigated in 6 mol·L-1 KOH solution by galvanostatic charge-discharge process and cyclic voltammetry(CV).It is demonstrated that Ru doped cobalt hydroxides exhibited good capacitive characteristic and high specific capacitance.The sample with a Co/Ru molar ratio of 8 /1 shows the optimized electrochemical performance,including capacitive property and discharge capacity.The microstructure and morphology of the obtained Ru doped hydroxides were characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM).The amorphous structure of ruthenium dioxide nanoparticles and single-crystal structure of Co(OH)2 platelets were confirmed.Based on a structure analysis and electrochemical measurement,the …
Studied Corrosion Behaviors Of Reinforcing Steel In Concrete By A Single-Dimensional Array Electrode, Lan-Qiang Li, Shi-Gang Dong, Rong-Gui Du, Chang-Jian Lin
Studied Corrosion Behaviors Of Reinforcing Steel In Concrete By A Single-Dimensional Array Electrode, Lan-Qiang Li, Shi-Gang Dong, Rong-Gui Du, Chang-Jian Lin
Journal of Electrochemistry
A single-dimensional array electrode was developed as a new electrochemical technique to image corrosion potential,galvanic current and polarization curves of reinforcing steel in concrete during corrosion process.Combining with the polarization behavior for each micro-electrode,the interactions between corrosion macrocell and corrosion microcell of the steel in concrete were evaluated.It was noticed that the corrosion macrocell and microcell occurred independently in difference regions at the initial stage of corrosion.The corrosion macrocell current can be in situ followed by corrosion potential imaging.The corrosion propagation of steel in concrete is closely related to the interactions between corrosion macrocell and corrosion microcell.
Electrochemical Corrosion Behavior Of Tio_2/Ha Composite Coating On Medical Titanium In Tyrode's Physiological Solution, Li-Li Kong, Long-Xiang Lin, Rong-Gang Hu, Fan Zhang, Chang-Jian Lin
Electrochemical Corrosion Behavior Of Tio_2/Ha Composite Coating On Medical Titanium In Tyrode's Physiological Solution, Li-Li Kong, Long-Xiang Lin, Rong-Gang Hu, Fan Zhang, Chang-Jian Lin
Journal of Electrochemistry
Titanium and its alloys have been widely used as medical implant materials because of their good mechanical properties and biocompatibility.However,the physiological corrosion of metal will release metal ions,resulting in toxic and side effects.In this paper,in order to improve the corrosion resistance of titanium,and to enhance its bioactivity and osseointegration,the surface modification of titamum were performed.Using eletrochemical methods Tafel polarization and electrochemical impedance spectroscopy(EIS) were applied to study the electrochemical corrosion behavior of TiO2 /HA composite coating.It is indicated that the corrosion resistance of the prepared TiO2 /Ti material in Tyrode's physiological solution is improved because of the enhanced surface barrier.
Electrochemical Behavior Of Europium(Ⅲ) In 1-Butyl-3-Methylimidazolium, Qiu-Yue Zhang, Hui He, Xiao-Hong Huang, Guo-An Ye
Electrochemical Behavior Of Europium(Ⅲ) In 1-Butyl-3-Methylimidazolium, Qiu-Yue Zhang, Hui He, Xiao-Hong Huang, Guo-An Ye
Journal of Electrochemistry
The electrochemical behavior of EuCl3 in 1-butyl-3-methylimidazolium chlorid([BMIM]Cl) has been investigated in the temperature range of 328 ～ 348 K by cyclic voltammetry.Influences of scan speed and temperature in [BMIM]Cl have been examined.The electrochemical window of [BMIM]Cl was-1.7 V ～ 0.80 V(vs.Ag/AgCl),when the working electrode was glassy carbon electrode.Eu3+ in[BMIM]Cl underwent a single step one-electron transfer reduction to Eu2 +,which is quasi-reversible reaction controlled by both electron transfer and diffusion of ions.The diffusion coefficient of Eu3 + in [BMIM]Cl increased with increase of temperature from 3.75 × 10-9 cm2 /s at 328 K to 1.32 × 10-8 cm2 /s at …
Electrocatalytic Reduction Of L-Cystine At Pb/Nanotio_2 Film Electrode, Dao-Bao Chu, Feng Wang, Ying Xiao, Xue-Jiao Zhang
Electrocatalytic Reduction Of L-Cystine At Pb/Nanotio_2 Film Electrode, Dao-Bao Chu, Feng Wang, Ying Xiao, Xue-Jiao Zhang
Journal of Electrochemistry
The nanoporous Ti-based TiO2 films electrodes modified with Pb particles(Pb/nanoTiO2) were prepared by using anodization and potentiostatic electro-deposition.The optimum deposition conditions were determined by comparing with various deposition potentials and time.The SEM analyses indicated that the TiO2 films were homogeneous nanoporous structure,and the Pb particles well dispersed on the TiO2 films.The L-cystine electrocatalytic activity reduction on the Pb/nanoTiO2 film electrodes was investigated by cyclic voltammetry and Chronoamperometric curves.The results showed that this type of the electrode posseses high acticity and stability.
Cobalt-Doped Todorokite Prepared By Refluxing At Atmospheric Pressure As Lithium-Ion Battery Cathode, Rui-Qi Li, Chun-Hua Song, Chao Xu, Li-Xing Tu, Guo-Hong Qiu, Fan Liu
Cobalt-Doped Todorokite Prepared By Refluxing At Atmospheric Pressure As Lithium-Ion Battery Cathode, Rui-Qi Li, Chun-Hua Song, Chao Xu, Li-Xing Tu, Guo-Hong Qiu, Fan Liu
Journal of Electrochemistry
Cobalt-doped todorokites were prepared by refluxing at atmospheric pressure,and then charactered by X-ray diffraction(XRD),thermogravimetry(TG) and the analysis of chemical compositions.These measurements showed that all of the refluxing products were single phase of todorokites and the structure formulas were MgxCoyMnOz·nH2O,where 0.18 ≤ x ≤ 0.22,0 ≤ y ≤ 0.24,2.10 ≤ z ≤ 2.53,and 0.35 ≤ n ≤0.73.The electrochemical characteristics of cobalt-doped todorokites were examined as lithium insertion hosts for cathodes in rechargeable lithium batteries.The first discharge capacity of undoped todorokite electrode was 211 mAh/g and the discharge capacity became 37 mAh/g after 30 cycles.The Mg0.18Co0.12MnO2.19·0.45 H2O with doping Co 10% displayed …
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo_2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo_2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu
Journal of Electrochemistry
Solid oxide full cell(SOFC) running directly on hydrocarbon fuels has attracted much attention in recent years.In this paper,a dual-layer structure anode was fabricated by tape casting and screen printing method.The addition of a LSCM-CeO2 catalyst layer to the supported anode surface yielded better performance in ethanol fuel.The maximum power density reached 710 and 669 mW/cm2 at 850 ℃ running on hydrogen gas steam and ethanol steam,respectively.No significant degradation in performance has been observed after 216 h of cell testing when the Ni-ScSZ13 anode was exposed to the ethanol steam at 700 ℃.Very little carbon was detected on the anode,suggesting that …
The Electrochemical Characteristics Of Cpo-Pll/Gc Electrode, Wen Zhao, Xia-Qin Wu, Zhong-Qing Lu, Wen-Jing Hou, He-Xing Li
The Electrochemical Characteristics Of Cpo-Pll/Gc Electrode, Wen Zhao, Xia-Qin Wu, Zhong-Qing Lu, Wen-Jing Hou, He-Xing Li
Journal of Electrochemistry
Poly-L-lysine(PLL) was electropolymerized onto the surface of glassy carbon(GC) electrode.1[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC) was used as a Cross-linking agent to immobilized Chloroperoxidase(CPO) onto the PLL/GC electrode.A pair of well-defined redox peaks was observed at CPO-PLL/GC electrode,which clearly suggested that PLL can promote the direct electron transfer between the CPO and the GC electrodes.The cyclic voltammetry results also showed that the electron transfer at CPO-PLL/GC is a surface adsorption-controlled quasi-reversible process,which is accompanied with proton transfer.The CPO-PLL/GC electrode exhibited a good electrochemical stability and excellently electrocatalytic activity for electrochemical reduction of O2.
Electrochemical Capacitance Of Mno_2 /Pani Composite, Xiao-Cun Xu, Kai-Yu Liu, Zhi-Gang Yin, Zhe Sun, Geng Su
Electrochemical Capacitance Of Mno_2 /Pani Composite, Xiao-Cun Xu, Kai-Yu Liu, Zhi-Gang Yin, Zhe Sun, Geng Su
Journal of Electrochemistry
Nano-MnO2 was prepared by using P123 as a soft template.The MnO2 /polyaniline composite was further prepared by polymerization of aniline with the nano-MnO2 in acidic conditions and was investigated by XRD and IR.The morphology of nano-MnO2 observed by SEM was changed with the introduction of aniline.The electrochemical properties of MnO2 /PANI electrode were investigated using cyclic voltammetry,galvanostatic charge-discharge and electrochemical impedance spectroscopy.The specific capacitance of MnO2 /PANI electrode could reach as high as 190.8 F·g-1,which decayed only 4.7% over 500 cycles.And the coulombic efficiency has been maintained at above 97%.
Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda
Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda
Journal of Electrochemistry
A new series of amphiphilic liquid crystalline block copolymer thin films,having normally aligned and highly ordered nanocylinder array,were functionalized as anisotropic ion conducting materials by selectively infiltration.These ion-active nanocylinders are coaxially aligned and hexagonally arranged in a large area,which might be used as novel types of electrolyte films for electrochemical energy systems such as lithium ion battery,fuel cell,etc.Since the ordered cylinders can carry on and store the ions,the block copolymer films can be utilized as the advanced template to fabricate the ordered array of nanoporous,nanoparticles,and nanowires for the potential application in lithium ion battery as three dimensional electrode materials.
Preparation And Characterization Of Sulfur/Mesoprous Carbon Composite Cathodes, Wen-Hua Zhang, Yao Chen, Xin-Ping Ai, Yu-Liang Cao
Preparation And Characterization Of Sulfur/Mesoprous Carbon Composite Cathodes, Wen-Hua Zhang, Yao Chen, Xin-Ping Ai, Yu-Liang Cao
Journal of Electrochemistry
A sulfur/mesoporous carbon composite was prepared by thermally treating a mixture of sublimed sulfur and mesoporous carbon.The microstructure of the mesoporous carbon was characterized by BET analysis and X-ray diffraction(XRD).The electrochemical performance of the S/C composite as cathode materials was evaluated by the galvanostatic method.The results confirmed that the mesoporous carbon could not only greatly enhance the electrochemical activity of sulfur electrode,but also effectively confine the diffusion of dissolved polysulfides in organic electrolyte.As a result,the S/C composites showed high capacity,good cycle performance and excellent rate capability.The specific capacity of the S/C composite was more than 1200 mAh/g for the first …
The Synthesise Of Electron-Conducting Redox Hydrogel And Its Application In Microbial Fuel Cell, Kai-Peng Wang, Sheng-Li Chen
The Synthesise Of Electron-Conducting Redox Hydrogel And Its Application In Microbial Fuel Cell, Kai-Peng Wang, Sheng-Li Chen
Journal of Electrochemistry
Efficient electron transfer between the microbe and the anode is key for the electricity generation in Microbial fuel cell(MFC).Through the modification of anode,the rate of electron transfer can be accelerated,therefore the performance of MFC can be enhanced.In this paper,we report the synthesis of a type of electronconducting and bio-compatible redox hydrogel and its application.The hydrogel consists of poly(4-vinylpyridine) as backbone and neutral red as the redox center.By immobiliazing neutral red on the backbone through covalent bond,the secondary contamination due to the soluble redox mediator to external environment can be prevented.MFCs using the hydrogel-modified carbon anode significantly exhibit shorter acclimation period,and …
Performance Of Sulfur-Super Conductive Carbon Black Composite In Electrolyte Mixed With Room Temperature Ionic Liquid, Bo Zhang, Si-Ting Chen, Xue-Ping Gao
Performance Of Sulfur-Super Conductive Carbon Black Composite In Electrolyte Mixed With Room Temperature Ionic Liquid, Bo Zhang, Si-Ting Chen, Xue-Ping Gao
Journal of Electrochemistry
The sulfur-super conductive carbon black composite was prepared as cathode material of lithium/sulfur battery.The composite was characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),and electrochemical impedance spectroscopy(EIS).The sulfur composite shows a high discharge capacity and a good cycle performance in electrolyte mixed with 50% of room temperature ionic liquid.In particular,the discharge capacity of the composite was stabilized at 483.6 mAh/g after 50 cycles.
Electrosynthesis Of P-Aminobenzenearsenic Acid, Chun-An Ma, Qin-An Zheng, Qiang Zhou, Ying-Hua Xu
Electrosynthesis Of P-Aminobenzenearsenic Acid, Chun-An Ma, Qin-An Zheng, Qiang Zhou, Ying-Hua Xu
Journal of Electrochemistry
The electrochemical reduction of p-nitrophenyl arsonit acid to p-aminobenzenearsenic acid was studied using controlled-current electrolysis.The results showed that the yield of p-aminobenzenearsenic acid was determinated by the following factors:the concentrations of sulphuric acid,the amount of additive,temperature and the concentrations of p-nitrophenyl arsenic acid.The optimum electrolytic conditions were obtained to be is 10% H2SO4,1% NaCl,80 ℃,25 g/350 mL p-nitrophenyl arsenic acid and 10 A·dm-2.The yield of arsanilic acid could be reached 64.7% under the optimum electrolytic conditions.
Study Of Electrodes Modified With Hybrid Copper Cobalt Hexacyanoferrate-Mwcnts Composites, Shan Jiang, Yun Zhang, Xiao-Yan Wang, Xiao-Fei Yao
Study Of Electrodes Modified With Hybrid Copper Cobalt Hexacyanoferrate-Mwcnts Composites, Shan Jiang, Yun Zhang, Xiao-Yan Wang, Xiao-Fei Yao
Journal of Electrochemistry
The hybrid modified electrodes were obtained by electrochemical deposition of copper-cobalt hexacyanoferrate(CuCoHCF) /multi-walled carbon nanotubes(MWCNTs) on the surface of glassy carbon electrode.The effects of the amount of MWCNTs and composition of electrolyte on the properties of modified electrode had been researched.The copper cobalt hexacyanoferrate-MWCNTs modified electrodes show excellent electrochemical properties compared with that modified only copper-cobalt hexacyanoferrate.The CuCoHCF-MWCNTs/GCE exhibits obvious electrocatalytic activity towards oxidation of hydrogen peroxide.The oxidation peak current increased linearly with the concentration of hydrogen peroxide in the range of 3.16 × 10-5 ～ 2.92 × 10-3 mol· L-1.The linear equation is given up ip(μA) = 0.5529 + …
Application Of Sol-Gel Technology In The Of Activation Process Of Chemical Plating Pretreatment, Lin Zhang, Wei Wang, Qian-Zhen Wu
Application Of Sol-Gel Technology In The Of Activation Process Of Chemical Plating Pretreatment, Lin Zhang, Wei Wang, Qian-Zhen Wu
Journal of Electrochemistry
Using KH-550 as precursors,gel thin films were formed on fabric by sol-gel method.By complexed with palladium ions due to the presences of amido and hydroxide in the gel thin films,the aggregation of palladium particles was inhibited.Therefore,Palladium could exhibit better catalytic activity in the process of electroless plating.The surface morphology of fabric was observed by SPM and SEM.Campared with the traditional pretreatment process,no SnCl2 was needed.This method reduced pollution,shortened process flow and reduced the amount of noble metals.
Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun
Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun
Journal of Electrochemistry
The property of an electrocatalyst depends strongly on its surface structure.The study of surface structure-catalytic functionality is the base of design and preparation of electrocatalysts of high activity,high stability and high selectivity at microstructure level.In this paper,based mainly on our results concering hydrogen and oxygen adsorption-desorption,ethylene glycol oxidation and CO2 reduction,the research progresses in tuning the surface structure and property of electrocatalysts are summarized.This paper overviews firstly the cyclic voltammetric characteristics,electrocatalytic properties of platinum single crystal planes lying on different crystallographic zones of the unit stereographic triangle of face-centered cubic(fcc) metals.Next,the innovation of electrochemical methods to control the surface structure …
Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen
Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen
Journal of Electrochemistry
The Ni-Pd alloy catalysts with Pd-enriched surface were synthesized through a modified polyol process.The synthesized materials were investigated by XRD and electrochemical methods,and tested as electrocatalysts for CH3OH-tolerant oxygen reduction.The results indicated that the synthesized Ni-Pd nanoparticles possess multiple phases containing Pd-Ni alloy and pure Ni.Comparing with Pd/C,the prepared Ni-Pd/C nanoparticles exhibited better resolved voltammetric peaks between the hydrogen absorption and adsorption,and positively shifted current peaks for the reduction of Pd oxide.The prepared Ni-Pd alloys with Pd-enriched surface have significantly enhanced ORR activity and improved CH3OH tolerance as comparing with Pd/C catalysts.
Electrooxidation Of Formic Acid On Pd-Ni Alloy Film Electrode-The Effect Of Dealloying, Chao Wang, Fei-Fei Shi, Jin-Yi Wang, Han-Xuan Zhang, Wen-Bin Cai
Electrooxidation Of Formic Acid On Pd-Ni Alloy Film Electrode-The Effect Of Dealloying, Chao Wang, Fei-Fei Shi, Jin-Yi Wang, Han-Xuan Zhang, Wen-Bin Cai
Journal of Electrochemistry
A Pd-Ni alloy film was electrodeposited on Au disc electrode at a constant potential from a weakly basic bath containing PdCl2,NiSO4 and ethylenediamine.The as-deposited film was then subjected to potential cycling in a perchloric acid solution for surface dealloying treatment.The dealloyed Pd-Ni film electrode was examined for the electrocatalytic oxidation of formic acid,and compared with the as-deposited one as well as a Pd film electrode.The FE-SEM and electrochemical measurements on the Pd-Ni films revealed that the dealloying treatment caused a surface roughening and an increase in specific surface reaction area.The ICP-AES and XPS analyses demonstrated that the preferential dissolution of …
Electrocatalytic Performance Of Carbon Supported Ir Catalysts With Different Ir Loadings For Ammonia Oxidation, Yu-Zhi Jiang, Qing-Mei Kong, Tian-Hong Lu, Yi-Ming Zhou, Ya-Wen Tang
Electrocatalytic Performance Of Carbon Supported Ir Catalysts With Different Ir Loadings For Ammonia Oxidation, Yu-Zhi Jiang, Qing-Mei Kong, Tian-Hong Lu, Yi-Ming Zhou, Ya-Wen Tang
Journal of Electrochemistry
The electrocatalytic performance of the Ir/C catalyst as the anodic catalyst in the amperometric and electrochemical NH3 sensor was investigated.The experimental results illustrated that in the NaClO4 neutral electrolyte,the electrocatalytic performance of the Ir/C catalyst for the NH3 oxidation is related to the Ir loading in the Ir/C catalyst.Among the Ir/C catalysts with different Ir loading,the best electrocatalytic activity,stability and sensitivity were achieved by the Ir/C catalyst with 10% Ir loadings.In addition,the current densities of the NH3 oxidation at the Ir/C catalysts with the different Ir loadings were linearly proportional to the NH3 concentration.The Ir/C catalyst has a potential application …
Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun
Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun
Journal of Electrochemistry
Adsorption and reduction of NO on electrode of Pt nanoparticles in acid solutions were studied by means of cyclic voltammetry(CV) and in-situ FTIR spectroscopy.The results indicated that the reduction of NO is a complicated process including the adsorption of NO on electrode surface.Two types of surface-bonded NO were determined on Pt nanoparticles.The weakly adsorbed NO was reduced between 0.6 V and-0.05 V,which yielded nitrous oxide(N2O) and ammonium(NH+4) as products;while the strongly bonded NO was reduced at more negative potentials between-0.05V and-0.15V,producing only NH4+ species.